Per Plus Logistics Tankcontainers BV presently operates a fleet of approximately 250 tankcontainers of which 30% are fully owned, The standard of the fleet of PER Plus Logistics Tankcontainers is 26.000 Litres type IMO/ADR T11 single compartment. The specification of the standard fleet is shown in the table below.


20' x 8' x 6'8"


26,000 litres

Max Gross Weight

34,000 kg

Tare Weight

3,900 - 4,350 kg

Calculation pressure
Test pressure
Working pressure

6.0 Bar
6.0 Bar
4.0 Bar

External Vacuum pressure

0.40 Bar

Design Temperature

120 C

Vessel Material

316 Stainless steel low carbon, <0.03%
Shell: 4,6 mm - Ends: 5,9 mm

Frame Material

Carbon Steel


US/UK D.O.T. IMO 1, ADR/RID, C.S.C., TIR, U.I.C., BAM, A.A.R. 600, F.R.A.


1 x 500 mm, 8 point fixed

Safety Relief valves

2" BSP screwed and flanged; provision for the future fitting of bursting disc

Airline outlet

1 " ball valve and gauge and 1 " BSP capped

Bottom outlet

80 mm, 30 C, clean flow, foot valve, 80 mm butterfly valve with 3" BSP threaded connector closed by st. cap and retaining cable

Top discharge

Provision 3" flange

Steam Heating

8 runs (ASTM A240 316) channels welded to base of tank; manifold; inlet/outlet pipes screwed and capped " BSP
Press test: 6 Bar Press Working: 4 Bar

Gasket Material



15 mm Rockwool, 70 mm Polyurethane


Shell from 0,8 mm thick natural aluminium (grade 5251) with lapped sealed joints




One or two longitudinal full length panels 475 mm wide, either side of manyway areas. Including top longitudinal protection handrails.


Painted, 300 mm wide on right hand rearside

Top boxes

2 off to enclose manlid area hinged to front end



Document Box

Standard fitted at left hand rear

Earthing Point

1 off stainless steel